Fuse & Fuse Accessories is continued from previous page.
fuses & fuse accessories
or go to
Terminals for Fuse Blocks
Brass terminals for fuse blocks offer quick dependable wiring connections.
Works with 16-14 gauge wire.
A 6-way ganged raised fuse block with a 22", 8 gauge hot wire. A screw terminal output and
cover, with a .375" stud ring terminal attached. 30 amp max per branch. Rated for 65 amp
max for all branches combined.
6 Gang ATC
Fused Distribution Block
This low profile, six gang ATC
fuse distribution block is a compact size and is used for
panel building, electrical control box building, machinery or automotive power distribution.
Wires can be installed directly under the screws without terminals, saving time and materials.
Fuse Circuits. 40A Max. Maximum 4 gauge wire power input with six 8 gauge
max outputs. Mounting Hole Separation: 88mm (3.465 inches). Metal Mounting Bracket
Width: 98mm (3.858 inches).
Black nylon 4-way fuse block is stackable with bolt holes for mounting to a stationary object.
Brass terminals included. Rated for 50 amp max for all branches combined. Includes one
terminal strip and four individual terminals.
single terminal for 1-way fuse block
terminal strip for 4-way fuse block
max amp all combined
4-way fuse block
max amp all combined
6-way fuse block
max amp per circuit
fused distribution block
Blade-type Fuse Panels
Compact, lightweight and rugged enough to use in recreational vehicles, trucks, buses
and boats. These panels will accept ATC
blade type fuses or blade type automatic
or manual reset circuit breakers. Panels range from 6 to 12 branch protected circuits.
Easy wiring with .250" quick connect branch circuit terminal and stud common ground or
.250" quick connect, if preferred. No top cover is needed recessed fuse contacts. Molded
of high grade thermoplastic. Rated -29C to 65C (-20F to 150F) with a UL rated 94V-0
thermoplastic body. Recessed mounting holes.
Common negative bus with push-on tabs.
Common positive feed.
Each branch handles up to 30 amps (160 amp maximum total).
blade type fuse panel
fuse panel with grounding pad
Protect up to six circuits with this heavy-duty fuse panel. The base is designed with a
patented contour locking system which allows for multiple interlocking fuse panels, and
incorporates a secondary storage unit to house extra fuses. The cover easily snaps into
place for added protection. Both the base and cover are manufactured from a polycarbonate
material for durability and strength. Screw mount terminals allow for easy wire connection.
Rated up to 32V DC; 30 amps maximum per branch, 100 amp per panel. Rated -20C to
120C (-4F to 248F).
max amps all combined
6-position fuse panel w/cover
N W EW W
Previous Page - Next Page
-Del City Interactive Catalog 2016
Choose a different directory.