Fuse & Fuse Accessories is continued from previous page.
fuses & fuse accessories
or go to
Mounting Bracket for Sealed Mini
Fuse/ISO Relay Panels
The mounting bracket for sealed Mini Fuse/ISO Relay Panels allows it to be mounted to
any surface. Two brackets are required to complete an assembly and each bracket is
manufactured of steel with zinc plating.
mounting bracket for sealed Mini
Fuse/ISO relay panels
Fuse Panel with TPAs
This compact, sealed power distribution module is perfect for accessory circuits, overflow
circuits from main PDM or a main module on smaller vehicles. It's hard-wired for 280 style
components and accepts Mini
fuses, relays, circuit breakers, diodes, etc. and Delphi Metri-
Pack 280 terminals, cable seals and cavity plugs. TPAs (terminal position assurance locks)
provide secondary protection from wire pull-out. TPAs snap onto the back of the unit after the
wires are installed, and do not interfere with the cable seals needed to ensure IP protection.
Easy to connect - wires plug into the back of the unit using industry-standard tanged Metri-
Pack terminals. Steel mounting bracket included. Module snaps into the bracket and is
held at a 30 angle to allow easy viewing and servicing of devices. Max Fuse Size: 30A.
Number of Cavities: 18. Mounting Torque: 5.5-6.5Nm. Materials: Body & Cover: UL94V-0
Glass-Filled Thermoplastic; Bracket: Plated Steel; Gasket: Silicone. Temperature Range:
-40C to 85C (-40F to 185F). Ingress Protection: IP67. Wire Sizes: 0.35-5.00 mm
Hard Wired Module
This hard-wired module is designed for use with 280 style components (MINI
diodes, resistors, etc.). It features 60 cavities creating a high-density fuse module with a
compact footprint. Without internal bussing, it allows the flexibility of custom circuitry by the
end user. The wire simply plugs into the back of the module using sealed Delphi Metri-
Pack Series 280 tanged terminals. Sealing in the cover and around the wires allow for use
in extreme environments. Dovetail features on the side of the unit allow the user to stack
multiple modules together to increase their circuit protection package. These same dovetails
can be used to attach an add-on component that holds a fuse puller and spare fuses. Max
Fuse Size: 30A. Number of Cavities: 60. 250A Max. Compatible Relay Types: 280 Footprint
Micro & Mini. Mounting Torque: 6-8Nm using M6 bolts and Hardware. Materials: UL 94V-0
Glass-filled Thermoplastic with Silicone Gasket. Wire Sizes: 0.35-5.0mm
sealed power distribution module w/TPAs and mounting bracket
sealed hard wired module w/base, cover, gasket & TPAs
These surface mounted fuse blocks are rated up to 15 amps max per circuit at 12V DC. .250"
male blade (side blade installation). Base material is nylon UL94V-0. Polycarbonate cover
includes rubber gasket to help seal out debris. Each fuse branch is independently powered.
part no. description branch mounting center-to-center max amps per circuit
fuse block 4
fuse block 6
fuse block 8
fuse block 10
Previous Page - Next Page
-Del City Interactive Catalog 2016
Choose a different directory.