Del City Interactive Catalog Page 198

198 relays & power distribution Scan for pricing or go to www.delcity.net/ catalogpricing Screw Type Terminal Blocks These individual gang/non bussed terminal blocks provide a common area to neatly connect multiple wire connections. Each barrier is spaced .41" to provide protection to the #8 screw mounting areas. Each mounting area is spaced .563" center-to-center. Block accepts wire ranges from #10 22AWG and carries a temperature rating of -40C to 130C (-40F to 260F). Rated 30A @ 600V. 70016 part no. gang part no. gang 70013 2 70018 8 70014 4 70020 10 70016 6 70022 12 part no. gang part no. gang 80542 2 80545 8 80543 4 80546 10 80544 6 80547 terminal block jumper Stud Type Junction Box Molded cover and housing designed to be corrosion resistant. Mounting holes are 7 3 /8 " center-to-center. Five open, five closed grommets and necessary hardware included. Seven independent #1032 studs. Rated to 30A max. part no. description 73800 stud-type junction box Multiple Stud Terminal Block - yellow zinc plated brass stud Stud terminal blocks provide the ability to join positive or negative, AC or DC connections and are rated up to 30 amps. The studs are directly molded into the base enabling them to withstand 25 inch-pound of torque for a solid tight fit. They are thermoplastic bars with yellow zinc-plated brass stud connections and come in lengths of 2 to 14 gangs. Each circuit is independent or non-bussed. Rating: 30A, 300V UL. 30A, 600V CSA. Material: Black Thermoplastic with Yellow Zinc-Plated Brass Studs. Termination: #10-32 Threaded Studs on .625" Centers. Torque Rating: 25 in-lbs (2.8Nm) Max. Mounting Torque Rating: 24 in-lbs (2.7Nm) Max. UL/CSA, CE Certified. Temperature Rating: 120C (250F). 70015 part no. no. of studs part no. no. of studs 70015 2 70004 10 70001 4 70005 12 70002 6 70006 14 70003 8 Multiple Stud Terminal Block - zinc-plated steel stud Stud terminal blocks provide the ability to join positive or negative, AC or DC connections and are rated up to 30 amps. The studs are directly molded into the base enabling them to withstand 25 inch-pound of torque for a solid tight fit. They are thermoplastic bars that have brass stud connections and come in lengths of 2 to 14 gangs. Each circuit is independent or non-bussed. Rating: 30A, 600V. Material: Black Thermoplastic with Zinc-Plated Steel Studs. Termination: #10-24 Threaded Studs on .750" Centers. Torque Rating: 25 in-lbs (2.8Nm) Max. Mounting Torque Rating: 24 in-lbs (2.7Nm) Max. UL/CSA, CE Certified. Temperature Rating: 120C (250F). 71232 part no. no. of studs part no. no. of studs 71232 2 71240 10 71234 4 71242 12 71236 6 71244 14 71238 8 71232 NEW Blue Sea Systems 65A Terminal Blocks Blue Sea Systems fully insulated independent terminal blocks are used to isolate circuits. Each screw pair is one isolated circuit. Terminal block jumpers allow the creation of common circuits. Closed back design completely insulates power from the mounting surface. Terminal block jumpers are made of nickel-plated brass and have a continuous amperage of 65A, same as the block. 2 to 10 circuits. Maximum Voltage: 600V AC/DC. Continuous Rating: 65A. Base Material: Phenolic. Bus Material: Nickel-Plated Brass. Screw Size: #10. NEW 80542 N W EW W 80542 Terminal Blocks

Previous Page
Next Page