Del City Interactive Catalog Page 60

60 loom & loom clamps Scan for pricing or go to www.delcity.net/ catalogpricing High-Temp Fiberglass Spark Plug Boot Sleeves These Fiberglass, High-Temp Spark Plug Boot Sleeves offer the same high temperature protection as our Fiberglass, High Temp Loom in an easy slip-on sleeve that will extend the life of expensive spark plug wires by protecting them where they need it most - at the boot. Just slip these 3/4" diameter double thickness sleeves over any spark plug cable and boot (even right angle), to protect them from engine temperatures up to 648C (1,200F). Once installed, the sleeves require no clearance from hot surfaces, and can even rest directly on hot exhaust headers without burning, melting, becoming brittle, or otherwise affecting performance. Fiberglass, High Temp Spark Plug Boot Sleeves are non-conductive, will not support combustion, and are resistant to gasoline and engine chemicals. Continuous Temperature Range: -70C to 650C (-94F to 1,202F). Melt Point: 1,120C (2,048F). High-Temp Fiberglass Wrap Fiberglass, High Temp Wrap is extremely resistant to high temperatures and is commonly used for automotive and high-performance headers and exhausts. Manufactured from texturized fiberglass yarns and woven into a strong and flexible wrap with vermiculite coating, Fiberglass, High Temp Wrap is easy to install and can reduce under-hood temperatures up to 70% and increase horsepower and fuel efficiency. It holds heat within the header, creating a better exhaust flow and allowing for easy removal of spent gases to create more airflow to the engine. Fiberglass, High Temp Wrap is resistant to cuts, abrasion, hasoline, and engine chemicals. Continuous Temperature Range: -57C to 649C (-70F to 1,200F). Melt Point:1,120C (2,048F). part no. color size I.D. length 651 black " 7" 653 natural " 7" part no. width length lbs per spool 620 1" 25-ft 2.625 621 2" 25-ft 4 RoHS NEW Expandable Tubing Hot Knife Expandable sleeving should be cut with a hot knife cutting tool or similar heated blade to keep the material fibers together. This bench mount 110 volt AC tool enables the operator to draw lexible sleeving down across the knife blade under tension. Both hands are then free to seal and flare ends. Must be used in a well ventilated area. Instructions are printed on the tool. Heavy-Duty Serrated Edge Scissors Serrated, angled shears are ideal for cutting clean cut expandable sleeving, metal braided sleeving, stainless steel expandable sleeving, and other sleeving types. Comfortable, high impact grips and stainless steel blades ensure years of use. part no. description 990070 expandable tubing hot knife part no. description 990099 heavy-duty serrated edge scissors NEW Related Products Safety Glasses page 212 COB LED Rechargeable Work Light page 346 Stainless Steel Cable Ties page 43 NEW

Previous Page
Next Page